Important Guidelines to Install a Split AC

·         Strength of the wall- The wall on which you are willing to install an AC should be strong enough to hold its weight else it can lead to physical damages.

·         The spacing between the wall and AC unit- This is crucial to assist proper functioning of an AC unit. The unit must be at least 15 cm far away from back wall and ceiling. Adequate air flow will maintain its performance and will not wear out anytime soon.

·         Height from the ground- Just like the position of the unit from the back wall is crucial; similarly, the height at which the AC needs to be installed is essential. Approximate height of seven to eight feet is adequate for its placement. It will maintain cooling inside the room.

·         Tilt angle- To maintain the unrestricted flow of condensed water, the AC unit should be fixed at a tilt angle. It can be achieved by setting the aluminum bracket at an angle slightly tilting than usual.

·         Correct location of the outdoor unit- To leverage full cooling benefits of an AC, fix its indoor and outdoor units at a dry place away from direct sunlight. The outdoor unit is always mounted in an open space to allow it to release the heat generated from the condenser.

·         Placement of outdoor unit- A flat and rigid surface should home an outdoor unit. A compressor, condenser, fan motor and other essential parts are encapsulated inside an outdoor unit. A flat surface is necessary to fix these units else the vibration caused by these elements can apparently break copper pipes, leak the coolant or lead to compressor/ condenser damage. Moreover, this vibration becomes noisy and can disturb you and your neighbors.

·         The distance between outdoor and indoor unit- The maximum distance between these units should be 15 meters to prevent the loss of cooling effect from copper tubes.

Air Conditioning Installation in Bexar

If you are searching for an AC Installationin Bexar, then contact none less than the professional experts of Comfort Commander. They are a family owned business of AC repair and maintenance,installation and replacement and thermostats. Have a new AC? Call them now!

What Affects Repair Costs of a Garage Door?

Have the operations of your garage door worn out? If yes, then you should consider doing an immediate repair because not only it is associated with your convenience, but also, with the safety of your residence. If the door has stuck at one position, then consider closing it down manually before it falls abruptly. Moreover, consider not using an impaired door because a single smash can pour your money down the drain with risk to loss of life and property. The following factors influence repair costs of a door:

The type of the Opener - There are various brands of doors and vast varieties of openers (including compatible or duplicate ones). If you have a copy of the door opener connected to your door, then it is likely to dysfunction. Consider fixing an original opener at first hand to cut down maintenance costs.

Maintenance of Door parts- To keep door's maintenance costs minimal, you should dedicatedly check its apparatus from time to time. It involves dusting the equipment, greasing the necessary parts, etc. This way you can mend an issue before you encounter a dysfunction.

Opener Remote- Many times we are fortunate when a problem encounters because the fix was not as big as the problem seemed. Similarly, if you discover that your door is has stopped operating then probably the batteries of your remote have drained down and nothing else.

Opener Wiring- You must ensure that all the wiring associated with your door is properly insulated and is away from any external disturbances which can hamper their functioning. If your opener's wires have worn out, then you would need to call a professional. This factor can add on to standard maintenance costs.

Why Should You Not Replace a Garage Door?

According to government rules and regulations, the replacement of a door may require HOA's (Home Owner Association) approval. HOA has defined strict rules related to making changes to the exterior of your residential spaces. For example, you cannot decorate your door with bright pink color as it will diminish the property value of others in the neighbourhood. Moreover, seeking HOA's approval may take longer than expected. If your door functions well and can be repaired with not too enormous costs, then you should go for fixing process. Also, reconditioning a door will take less time, and you can shift back to your regular schedule the same day of repairing.

Garage Door Repairing Services in San Antonio

If you are looking for an expert professional in garage door repairing services San Antonio, then Premium Overhead Door Inc. is the best place to knock the door on your difficulty. To meet customer's expectations, they keep their trucks fully loaded to respond to customer's call within 24 hours.

Tips to Store an RV in Storage Unit

Do you own a recreational vehicle (RV)? If yes, then you may not be using it frequently and just for special occasions or holidays? Rest time it must be resting idly in a storage or garage unit. To keep it fully functional and operational over long years you'll have to put some efforts in its packaging before moving it to the unit. The following are a few necessary steps to follow:

·         Squeaky Cleaning and Sealing- Some may wonder, what's the need of cleaning RV before locking it up in indoor storage? The reason is dirt may get deposited on the vehicle's surface forming black streaks and grime. Thus, irrespective of the type of storage, you should give your RV a good wash and smother it with wax. Also, if it has distorted seals, then it's time to repair all of them and thus, leaving no room for further damages. Check all silicon seams, caulking and rubber seals for cracks or tear. Make sure there's no water in the unit because the most expensive repair bills of an RV stem from water damages while it is in storage.

·         Ventilation- Ensure there's no residual of moisture after cleaning in the vehicle; else it will lead to musty smell and fungal growth. An artifice is to keep the vehicle's vents open and having special vent covers installed on the unit.

·         Blinds and Curtains- Allow light to pass into the unit in which your vehicle is stored because darkness can give birth to mold spots. Moreover, moisture develops, and vehicles tend to leak in the dark. 

·         Slide Outs- Before putting your RV in unit sheath all slides as a leak-proof measure. Clean all the rubber seals, roof and mechanical parts of the vehicle followed by application of rubber seal conditioner as a measure of corrosion protection. For inner seals, consider rubbing baby powder to keep them dry until they are used again.

·         Bugs and Rodents- Makes sure you are not storing any food materials, soap, toothpaste, paper towels, etc. which can create a magnetic influence on bugs and rodents. Stuffing steel wool and spray foam at vulnerable sites can help in keeping away these creatures. Do a thorough check of the unit for any exposed areas.

·         Electric Wires and Switches- The batteries of your RV must be having an electrical switch behind it. Make sure you are turning it off to prevent battery drain. Also, the batteries should be fully charged because its power gets mostly influenced by temperature conditions.

RV Storage in San Antonio TX

Keep your RV safe and maintained in one of the best RV storage in San Antonio- Storage 4U. They'll give you most reliable packaging guidance to keep your assets as is and fully functional. Call them now!

How is a Swimming Pool constructed?

A swimming pool is a beautiful addition to the facet of your building. This fun site isn't an easy building project. Moreover, many local protocols do not allow building a pool by yourself if you do not own certification and license for the same. Steps to make a swimming pool are as follows:

1.       Finalize the design- Your pool builder will start with personalizing a plan for your pool. Here, you'll discuss the budget, design, shape, color, size, measurements, and other details of the pool to create a blueprint. The construction of complex models levies significant costs.

2.       Get a permit for swimming pool construction- As per government rules, not all neighborhoods can allow pools. Therefore, you would require getting legal permissions before you start the development. If your contractor has an experienced and qualified service then, he/she can accomplish this task for you on your name.

3.       Evacuate the site- Once, the permit is approved, your builder will start digging the site as per the discussed plan.

4.       Grade the base- After the evacuation has been done entirely, the constructors will lay a firm foundation over the uneven ground surface. Usually, pool subsoil is layered at the bottom, poured on a geotextile and rammed.

5.       Implement pool design- If you want a readymade pool to be fixed in the evacuation, then the pool will be transported by a crane and settled over the leveled ground surface.  If you have had heads up for making the pool, then the workers will start forming the interior of the pool with wood and metal rebar.

6.       Attach the filters and water pipes- The builder will then employ some licensed plumbers to set up the filtration system and other necessities.

7.       Connect electronic accessories- Since, water reacts dangerously with electricity, your builder will have to employ an expert & licensed electrician. He/she will connect the filtration system, lights, wave feature, etc. to electricity.

8.       Build the floor- Post all connections are made, the builder will then start building actual walls and floor of the pool with cement paste.

9.       Build the walls- Once the floor is cemented, the builder will then start creating walls. Cinder block or poured concrete is used in this activity.

10.   Design the floor & walls- Ultimately, your builder will give final touches to the floor, edges, and walls. Additionally, moisture barrier will be an essential component to prevent the water from leaching out. You can get your pool laced with a plastic liner or real tile covering or plaster coating or sprayed plastic coating.

11.   Fill the pool- The pool is now ready to be filled and used.

Swimming Pool Builder

Keith Zars Pools are licensed and certified pool builders and repairers in San Antonio. Call them now if you are looking for creative designers who can create a beautiful pool site on your property.

Why Do Garage Door Springs Break?

You have made one of the most significant investments of your life if you have got a door installed in your garage. These assets demand high levels of maintenance and sensitive access to keep them successfully operable for years. Springs are responsible for holding the door's weight while opening and closing the door. Severe damages may take place to life and property if the door's springs break. There are three primary reasons why these break:

Wear & Tear- On an average, adequately installed torsion springs sustain 10,000 cycles approximately. A cycle completes when an opened door is shut down completely. Mathematically, if you are accessing the door only once in the entire day, meaning a single instance of opening plus a single instance of closing, then it sums up to 730 times access in a year. The life of such doors is stated to be approximately thirteen and a half years (13 ½). However, we use these doors periodically in a single day that it clashes its typical lifespan. If you keep a track on the count of ingress, you'll be surprised to learn that your door has completed a few thousands of cycles just in a few months of installation. Wear & tear is one of the most vulnerable causes of broken torsion springs. Ensure that you are not accessing your door unnecessarily and abruptly.

 Rusting- Installing these doors in your home's backyard or storage space is quite a significant investment. What comes along with this installation is the high level of maintenance. If you are getting lazy about it, then rust formation can take place eventually. Rusting can directly lead to the damage of torsion springs, thus, shortening their functional life. It can also cause friction in the coil which can hamper its life. A simple rule to prevent rusting is to feed the coil with a lubricant after every couple of months. The chemical properties of lubricant intercept the formation of rust.

Substandard Maintenance- If you are failing the upkeep of your door and its parts then it won't sustain a healthy life for long. You will have to stay attentive with the servicing the door and its accessory parts. Else, the springs will soon tear off causing high maintenance costs. Experts suggest that majority spring failures take place in winters; hence, special care is required during this season. You can test the operation of springs periodically by lifting the door halfway to let it go upwards by itself. If it gets stuck then and there, then the springs are in good working condition. Else if the door moves down a bit, then the springs are at risk and should be attended soon.

Residential Garage Door Repair

R & L Overhead Door Inc. is a company specialized in residential garage door repair in San Antonio. Dealing with the door's repair by yourself can be risky and can cause malfunctioning of its parts if handled inefficiently. Call the garage door experts now!