Preventive Measures to Take Before Storing a Boat

Winters are up here with cold winds. It is the time to store your boat in a private warehouse or a storage facility before the cold winds and snowfall pull away the charm of your valuable asset. However, hauling a heavy boat in a facility isn't this easy, and if not appropriately cloaked, the weather conditions can vanquish the appearance & functioning of your expensive boat. The following details describe how to prepare a boat for storage:

·         Change the engine oil- Corrosion is native damage and can congest the operations of a fully functional machine. By any means, if the engine oil of your boat adjuncts water or acid, then the oil can react adversely and corrode the engine of the boat. A necessary measure to follow before packing your boat should include changing the filter, drying the water out and adding new oil.

·         Refresh the coolant system- Make sure you drain and flush the current coolant with water. To prevent the engine parts from corrosion, fill the coolant with fresh and diluted antifreeze.

·         Treat with fogging oil- To keep engine's moving parts protected during cold weather, treat the carburetor or spark plug holes with fogging oil without starting the engine.

·         Pack drive belts separately- Drive belts are vulnerable to breakage under stress and hence, a good practice is to release tension from the belts by loosening or removing them before the boat is stored.

·         Grease the steering- Make sure you are greasing the steering controls and other joints before pushing the boat into a lonely storage unit.

·         Disconnect the battery- You are storing your boat to keep it secure from the ill effects of the cold season. However, if you don't pay attention to its battery, then you are taking futile efforts in storing the boat. Winters can drain and draw away battery life if it is not disconnected and topped off with distilled water.

·         Suffuse gas tank- In winters, accumulated moisture tends to freeze and develop condensation. This chemical change can damage the parts of your boat. To prevent this, use a gasoline stabilizer.

·         Seal ports- Use duct tapes to seal the exhaust post openings of your boat, else, pests can home in and hamper its functioning.

·         Wash and wax- This is an essential preventive measure if you are planning to haul your boat in an outside storage unit. Thoroughly clean the boat and then cover its body with wax to prevent rusting.

·         Use a cover- Shielding boat with a cover will guard it against dirt, dust, grime, and moisture.

Boat Storage in San Antonio

Storage 4U is one of the affordable facilities for boat storage in San Antonio TX. They are equipped with gated access and 24-hour video surveillance to keep your asset secure and protected. They are a family of experts and have been in this business for more than two decades. For storage call them now!